Buy Cellulose from a GOOD MANUFACTURER!
Answered by Moosehead
-
The information you heard about concerning fiberglass being a suspected carcinogen is correct. In July of 1994, the federal government labeled fiberglass as a substance that quite possibly could be a carcinogen. However, the U. S. Department of Health and Human Services, in a letter to Congress, exclaimed that they felt that fiberglass does not pose a threat to persons in their daily lives.
The risk appears to be centered around the fact that when installing either blown or batt type fiberglass, small glass fibers become airborne. These fibers can then be inhaled into your lungs. This can in fact happen. Years ago, as an uninformed rookie, I installed fiberglass without using a facial mask. After working with the material for several hours, I could feel the fiberglass in my throat.
However, once installed, fiberglass is almost always covered with some material. Or, it is in an attic space where it can not be easily disturbed. This is why it does not pose a serious health threat to the average person.
Fiberglass manufacturers have responded to this concern. You can now purchase fiberglass batt insulation that has a combination plastic and kraft paper covering. The back side usually has small perforations in the plastic to prevent the buildup of water vapor within the insulation.
Cellulose insulation is made primarily from recycled newspaper. Yes, newspaper is very flammable. However, cellulose insulation is treated with either sodium borate, boric acid, or ammonium sulfate. These chemicals, which have been deemed safe for humans, make cellulose insulation fire retardant. These chemicals also repel rodents, insects, and mold.
However, I have a concern about quality control when the chemicals are applied to the ground up paper. What happens if the chemicals are not mixed correctly? What happens if not enough chemical is applied? Is it possible for there to be a malfunction at the factory and you receive a bad batch? How can you test for yourself that enough chemicals have been applied?
These chemicals apparently retain their ability to retard fires in the hot temperatures found in many attics. However, there have been instances when cellulose has indirectly caused a fire. This usually happens when either type insulation is installed in direct contact with an older style recessed lighting fixture. The insulation traps the heat created by the light bulb. This, in turn, causes the lighting fixture to overheat. Some modern recessed fixtures have thermostats
within the fixture that turn the light off if it begins to overheat.
Settling of blown insulation can affect its long term R-value. R-value is the term used to measure the flow of heat through an object or material. A higher number indicates that the object or material has a higher insulating capability.
Most blown-in fiberglass and cellulose insulations settle, or compact, after installation. Cellulose seems to settle more than fiberglass. Some fiberglass manufacturers have developed newer loose fill fiberglass that evidently does not settle. Once it has settled, fiberglass has an R-value of 2.1 - 2.7 per inch, while cellulose has an R-value of approximately 3.0 per inch.
Loose fill blown fiberglass insulation has another slight problem. As the temperature difference between the living space
and attic increases, the R-value of blown fiberglass diminishes. In extreme situations, such as the upper Midwest, this reduction in R-value approaches 50 percent.
This phenomena seems to occur as a result of thermal convection. The trapped air molecules in the insulation are pulled up through the insulation into the colder attic air. This problem has been successfully solved by installing fiberglass batt insulation over the top of loose fill or blown insulation.
The bottom line is that INCORRECTLY manufactured cellulose can burn, but fiberglass will not support combustion. Fiberglass is a known carcinogen. Cellulose is recycled and the borates used for fire retardant also prevents mold and vermin infestation.
Choose your insulation and installer wisely.
AB IQ Forum - Q&A Series Ask | Answer | Discover 
Answer this questions 
Show/Hide Answers 
